Voodoo3 Windows(r) NT 4.0 Driver Kit
---------------------------------------
Voodoo3(tm) Driver kit: 1.00.00
Voodoo3 WinNT(r) Display Driver and Miniport: 4.00.1381.0403
Voodoo3 Glide(tm) 2.X Driver: 2.60.00.0410
Voodoo3 Glide 3.X Driver: 3.10.00.0408
Voodoo3 Control Panel: 4.11.01.0036

Copyright ( 1998-1999 3Dfx Interactive, Inc. )
All Rights Reserved

NOTE: Use of this software is subject to the terms in the 3Dfx license 
agreement.

3Dfx Interactive, Inc.
Website: http://www.3dfx.com

This product may be covered by one or more of the following
US patents: 5,724,561  5,740,343  5,808,621  5,822,452  5,831,624

=======================================================================
What's in the distribution?
=======================================================================
This distribution contains Voodoo3 display drivers and control 
panel for Windows NT 4.0 or higher. 

=======================================================================
Installation 
=======================================================================

Requirements
------------
- Windows NT 4.0 or higher
- PC with a Pentium II, Pentium Pro, Pentium or similar processor
- 16MB of RAM or more Suggested


Fresh Installation / Upgrade Existing Drivers
---------------------------------------------

NOTE: For Fresh Installations, complete Steps 1 - 9 before removing 
your existing 2D card.  If existing Voodoo3 drivers are being updated,
installation is complete once step 9 is done.

1) Extract the files for the Voodoo3 driver to a directory.
2) Log-in to Windows NT as Administrator.
3) Click Start, Contol Panel.  Double-click on Display.
4) Click the settings tab then click "Change"
6) Click "Have Disk" and enter the path to the extracted drivers.
7) When asked to choose a device, select "Voodoo3"
8) You may then be prompted to insert the Windows NT Voodoo3 Driver Disk.
   Enter the path to the drivers again.
9) Windows NT will copy the drivers.   

Steps 10-13 are only used during a fresh installation

10) Power off the system and remove your existing 2D card.
11) Install the Voodoo3 Card in a free PCI/AGP Slot
12) Power on the system and verify that video appears during post
13) Start Windows NT.  If problems occur, revert to "Last Known Good"
    from within the Windows NT startup options.

